1.Insert the empty USB flash drive into a USB connector on your PC.
2.On your PC, create a folder named
„upgrades‟ in the root directory of the USB flash drive.
3.In your web browser, navigate to www.philips.com/support.
4.At the Philips Support site, find your product and locate the Help file for your TV. The Help file (a *.upg file) is compressed into a *.zip archive.
5.If the Help file at the Philips Support site is a later version than the file in your TV, click it to save the file to the USB flash drive.
6.Using the archive utility, extract the *.zip file to the „upgrades‟ folder in the USB flash drive.
7.The *.upg Help file is extracted.
8.Disconnect the USB flash drive from the PC.
∙Do not switch off the TV or remove the USB flash drive during the update.
∙If a power failure occurs during the update, do not remove the USB flash drive from the TV. The TV will continue the update as soon as power is restored.
∙If an error occurs during the update, retry the procedure. If the error reoccurs, contact Philips Consumer Care.
1.Switch on the TV.
2.Connect the USB flash drive containing the *.upg Help file to the USB connector on the TV. Disconnect all other USB devices from the TV.
3.Press 
.
4.Select [Setup] > [Software settings] > [Local updates].
The updates screen appears.
5.Select the '*.upg' Help file and press OK.
A message will display the update status. Follow the
EN 44
Reinstall the TV
Reinstalling your TV resets all picture and sound settings, and reinstalls all TV channels.
1.Press 
.
2.Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the
