Basic Connections - DVD recorder
E n g l i s h
Quick Setup Overview
ANT OUT | ANT IN |
RF OUT | RF IN |
Antenna/cable TV signal |
|
|
| VCR/Cable Box/ |
(optional) |
| 1 Satellite Receiver |
Cable Box / |
| |
Satellite Receiver |
| |
(optional) | OR |
|
VCR |
| |
|
| |
| DVD Recorder | ➠ |
| TV | 2 |
|
| |
| example of your existing antenna | |
| connection |
|
| new antenna connection |
|
Antenna/ cable TV signal
TV
Step 1: Connecting the antenna cables
These connections enable you to watch and record TV programs using the DVD recorder. If the antenna signal is connected via a VCR, Cable Box or Satellite Receiver, ensure that these devices are turned on in order to watch or record the cable programs.
●If your TV is equipped with an Antenna In (RF IN) jack only,
see page 15 for the complete connection to your TV.
●If you want to connect to a VCR and/or Cable Box/Satellite Receiver, see page 16~18 for the complete connection to your TV.
1Connect existing Antenna/Cable TV signal (or from the Cable Box/Satellite Receiver, labeled as RF OUT or TO TV) to the
ANTENNA 
jack on the DVD recorder.
2Use the supplied RF coaxial cable to
connect TV 
socket on the DVD recorder to the antenna input jack (or labeled as VHF/UHF RF IN) on your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
12
001_033_dvdr3355_37A_eng5 | 12 | 21/3/05, 3:16 PM |
