Getting Started (continued)
E n g l i s h
Step 3: TV channel programming
Before the DVD recorder can start recording the TV channel programs, you need to search for the available TV channels and store them in the recorder.
Note: Make sure you have successfully made all the required connections to the DVD recorder, the TV and Satellite Receiver/Cable Box (if any) and switched them on.
Tuner settings can only be changed when there is no disc in the disc tray.
Automatic TV channel search
This will automatically scan all the receivable TV channels and the cable programs from the Cable Box/Satellite Receiver and store these channels on the DVD recorder.
1Press
➜ The system menu appears on the TV.
2Use 3 4 keys to highlight 
{ System Menu - Channel Setup } and press 2.
System Menu - Channel Setup
|
|
|
|
| Tuner Input Source | Cable |
|
| Channel Search |
|
|
| Search | ||
| Modify Channel Information |
|
|
| Edit | ||
|
|
|
|
|
|
|
|
|
|
|
|
SYSTEM | 3 Use 3 4 keys to highlight { Tuner Input |
MENU | |
OK | Source } and press OK. |
| { Cable } |
| Select this if the DVD recorder is connected |
| via a cable box/satellite receiver. |
| { Air } |
| Select this if the DVD recorder is connected |
| directly to the antenna wall outlet |
| 4 Press OK to confirm. |
| 5 Use 3 4 keys to highlight { Channel |
| Search } and press OK. |
| ➜ The automatic TV channel search |
| starts. This process may take several |
| minutes. Once complete, the total |
| number of channels found appears on the |
| TV. |
TIPS: Press 1 to go back to previous menu item.
Press
24
001_033_dvdr3355_37A_eng5 | 24 | 21/3/05, 3:17 PM |
