Philips DVDR3570H58 user manual Connecting to a VCR or other similar device, VCR example only

Step 2: Optional Connections (continued)

VCR (example only)

VHF/UHF
RF IN	SCART OUT	SCART IN

VHF/UHF

RF OUT

D

CVBS OUT Y PB

EXT1 TO TV EXT2 TO VCR/SAT L

TV-OUT ANTENNA-IN

		PR
	R
		MAINS
S-VIDEO OUT	AUDIO	COAXIAL
VIDEO OUT	AUDIO OUT	DIGITAL OUT

B

TV

C

English

Connecting to a VCR or other similar device

This connection enables you to record from video tape to hard disk and allows the VCR to be used for playback on the TV if the recorder is turned off.

Note:

Your new recorder can replace the VCR for all your recording needs. Just unplug all the connections to your VCR.

A Connect the existing Antenna cable (it can be from the off-air wall socket or Cable Box) to the ANTENNA-IN socket on the recorder.

B Connect a RF antenna cable (supplied) from the TV-OUT socket on the recorder to the antenna input socket on your TV (usually labelled as ANT,

ANTENNA IN, RF IN).

C Connect a scart cable (supplied) from the EXT1 TO TV socket on the recorder to the corresponding SCART socket on the TV.

D Connect another scart cable (not supplied) from the EXT2-TO VCR/ SAT socket on the recorder to the Scart socket (usually labelled as TV OUT or TO TV) on the VCR.

Helpful Hints:

–Most commercial video cassettes and DVDs are copy-protected and therefore cannot be recorded.

–Connect the recorder directly to the TV. If there is a VCR or an additional device in between, the picture quality may be poor.

21