Antenna connection
Supplied FM antenna:
Connect the FM antenna wire to the FM 75 OHMS jack and position
the FM antenna wire in the direction where the strongest signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM and GND terminals. Position the AM loop antenna for optimum reception. Place the AM loop
antenna on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception.
Installing the AM loop antenna: |
|
< Assembling > | < Attaching to the wall > |
Speaker connection
Connect the black wire to the minus
Red | Black | Use |
Caution: |
| |
Use speakers with an impedance of 4 ohms or more, as lower | ||
impedance speakers can damage the unit. | for | |
Do not mistake the right and the left |
| |
channels. The right speaker is the one on the | Preparation | |
right side when you face the unit. |
| |
|
| |
Do not let the bare speaker wires touch |
| |
each other. |
|
|
Do not allow any objects to fall into or to be |
| |
placed in the bass reflex ducts. |
|
|
Do not stand or sit on the speakers. You may |
| |
be injured. | Incorrect |
|
Connecting iPod to a TV
The iPod with photo and video can be viewed by connecting to a TV/ monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT jack on the rear of the unit.
Video cable
TV
Wall Screws (not supplied)
(not supplied)
To video
input jack
Note:
Please make sure to set iPod unit to either NTSC or PAL to match your TV signal. Please visit Apple’s home page for futher information.
11
