Sharp DK227N To insert iPod adaptor, To remove iPod unit, To remove iPod adaptor, iPod playback

To insert iPod adaptor

1.Press the ON/STAND-BY button to turn the power on.

2.Open the iPod docking station by pushing the area marked

“ PUSH OPEN”.

3. Insert the iPod adaptor into the ipod dock and connect your iPod.

iPod (bottom) iPod

Dock connector

iPod adaptor

iPod dock

iPod connector

Caution:

Do not place the iPod docking base without any support from below when inserting the iPod unit, otherwise it may damage the iPod docking station.

To remove iPod unit

Press and hold the iPod docking base when removing the iPod unit.

To remove iPod adaptor

1. Adaptor with tip.

Hold this tip and pull as direction shown to remove adaptor

pull up

2.Adaptor without tip.

Insert the tip of a screwdriver (“–“ type, small) into the iPod adaptor hole as shown and lift upward to remove)

iPod playback

1Press the ON/STAND-BY button to turn the power on.

2Press the iPod button to select iPod function.

3Insert iPod unit in iPod dock of main unit. “DOCK OK” will be displayed for 3 seconds except for iPod mini and 4th Generation iPod.

iPod

iPod adaptor

4Press the / button to start playback.

XL-DK227N

iPod

17