Sharp DK227N Sleep operation, Checking the timer setting in the timer stand-by mode

XL-DK227NTimer and sleep operation (Remote Control only) (continued)

Advanced Features

Note:

When performing timer playback using another unit connected to the

iPod terminal or AUDIO IN jack, select “iPod” or “AUDIO IN” in step 8. This unit will turn on or enter the power stand-by mode automatically. However, the connected unit to AUDIO IN jack will not turn on or off.

Checking the timer setting in the timer stand-by mode:

1Press the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “ONCE” or “DAILY”, and press the MEMORY button.

3Within 10 seconds, press the or button to select “ONCE CALL” or “DAILY CALL”, and press the MEMORY button. The unit returns to the timer stand-by mode after displaying the settings in order.

Canceling the timer setting in the timer stand-by mode:

1Press the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “ONCE” or “DAILY”, and press the MEMORY button.

3Within 10 seconds, press the or button to select “ONCE OFF” or “DAILY OFF”, and press the MEMORY button. Timer will be canceled (the setting will not be canceled).

Reusing the memorized timer setting:

The timer setting will be memorized once it is entered. To reuse the same setting, perform the following operations.

1Turn the power on and press the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “ONCE” or “DAILY”, and press the MEMORY button.

3Within 10 seconds, press the or button to select “ONCE ON” or “DAILY ON”, and press the MEMORY button.

4Press the ON/STAND-BY button to enter the power stand-by mode.

Sleep operation

The radio, compact disc and iPod can be turned off automatically.

1Play back the desired sound source.

2Press the CLOCK/TIMER button.

3Within 10 seconds, press the

or button to select “SLEEP”, and press the MEMORY button.

4Press the or button to select the time. (Maximum: 3 hours - Minimum: 1 minute)

3 hours - 5 minutes 5-minute intervals 5 minutes - 1 minute 1-minute intervals

5Press the MEMORY button.

“SLEEP” will appear.

6The unit will enter the power stand-by mode automatically after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep operation finishes.

To confirm the remaining sleep time:

1While “SLEEP” is indicated, press the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “SLEEP X : XX”.

“X : XX” is sleep remaining time.

The remaining sleep time is displayed for about 10 seconds. You can change the remaining sleep time while it is displayed by pressing the MEMORY button (steps 4 - 5).

30