Sharp DK227N operation manual Advanced Features

4 Within 10 seconds, press the	or	button to	9 Adjust the volume using the VOLUME control, and then
select “ONCE SET” or “DAILY SET”, and press the			press the MEMORY button.
MEMORY button.			Do not turn the volume up too high.

				10 Press the ON/STAND-BY button to enter the power stand-
				by mode.
5	Press the	or	button to adjust the hour and	The “TIMER” indicator lights up and the unit is ready for timer
				playback.
	then press the MEMORY button.

The illustrations show the timer playback setting in the daily timer mode.

6 Press the or button to adjust the minutes and then press the MEMORY button.

						11 When the preset time is reached, playback will start.
						The volume will increase gradually until it reaches the preset
						volume.
7 Set the time to finish as in steps 5 and 6 above.
						12 When the timer end time is reached, the system will enter
8 Switch input with the				or	button, and then
						the power stand-by mode automatically.
press the MEMORY button.						Once timer:
To select the timer playback source: CD, TUNER, iPod or
						The timer will be canceled.
AUDIO IN.
						Daily timer:
	When you select the tuner, select a station by pressing the
						The timer will operate at the same time every day. It will
		or	button, and then press the MEMORY
	button.					continue until the daily timer setting is canceled. Cancel the
	If a station has not been programmed, “NO PRESET” will be					daily timer when it is not in use.
	displayed and timer setting will be canceled.

XL-DK227N

Advanced Features

29