Sharp XL-DK227N Enhancing your system continued, Subwoofer connection, Audio Player, etc

XL-DK227NEnhancing your system (continued)

Auto power on function:

When you press any of the following buttons, the unit turns on. AUDIO IN button (main unit and remote control): The unit turns on and the “AUDIO IN” function is activated.

/ button on the main unit: The unit turns on and playback of the last function starts (CD,TUNER, AUDIO IN, iPod).

Subwoofer connection

When a commercially available subwoofer with a built-in amplifier is connected to this unit, you can enjoy sound with emphasized bass. Connect an RCA cord from a commercially available speaker with a built-in amplifier to the SUBWOOFER PRE-OUT jack.

Advanced Features

Listening to the playback sounds of Portable

Audio Player, etc.

1 Use a connection cord to connect the Portable Audio Player etc. to the AUDIO IN jack.

When using video equipment, connect the audio output to this unit and the video output to a television.

2 Press the ON/STAND-BY button to turn the power on. 3 Press the AUDIO IN button.

4 Play the connected equipment.

Note:

To prevent noise interference, place the unit away from the television.

Subwoofer with a built-in amplifier

Headphones

Do not turn the volume on to full at switch on. Listen to music at moderate levels. Excessive sound pressure from earphones and headphones can cause hearing loss.

Before plugging in or unplugging the headphones, reduce the volume.

Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms.

Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control.

32