XL-DK227N Listening to the iPod (continued)
iPod
To disconnect iPod
Simply remove the iPod from the iPod dock. It is safe to do so even during playback.
Navigating the iPod menus with the remote con- trol
1Press the CLEAR/DIMMER button to view the menu on iPod unit. Press it again to go back to previous menu.
2Use the TUNING (
or 
) button to select an item on the menu and then press MEMORY button.
Notes:
When navigating the iPod menus with remote control, do not operate any of the buttons on the iPod unit.
The volume level is adjusted by pressing the VOL (+ or
Watching videos on a TV connected to iPod
1Press the DISPLAY button for more than 2 seconds. “TV DISP” will appear on display.
2Select the desired video from iPod unit to be played.
3Press the MEMORY button to start playback.
Notes:
If the TV Out setting is already turned on at video menu, the video is automatically displayed on the TV screen when MEMORY key is pressed.
To return to watching video on iPod screen, press the CLEAR button to enter video menu. Then press the DISPLAY button for more than 2 seconds until “iPod DISP” appears. Repeat steps 2 and 3.
During iPod video playback, pressing the DISPLAY button will not toggle video out display between iPod and TV.
iPod operation
The operations described below depend on the generation iPod you are using.
System on operation
When the main unit is powered on, the iPod unit will automatically power on when docked in the unit (including TIMER function).
System off
When the main unit is turned to
iPod playback detection function
Once the play button on the iPod unit is pressed, the main unit will automatically change to iPod function overriding the previous function selected.
Caution:
Unplug all accessories for the iPod before inserting it into the iPod dock.
Stop button (
) at main unit is invalid during iPod function.
18
