Sharp XL-DK227N General control, Basic Operation, To turn the power on, Volume auto fade-in

XL-DK227NGeneral control

Basic Operation

Docking Station

MICRO COMPONENT SYSTEM

To turn the power on

Press the ON/STAND-BY button to turn the power on.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

Illumination light control

When the unit’s power is turned on, the ring around the volume control lights up. To turn on/off the light, hold down the CLEAR/ DIMMER button on the remote control for more than 2 seconds.

Volume auto fade-in

If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level.

Volume control

Main unit operation:

When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease.

Remote control operation:

Press the VOLUME (+ or –) button to increase or decrease the volume.

0 ..... 30 MAXIMUM

Bass control

When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and “X-BASS” will appear. To cancel the extra bass mode, press the X-BASS button on the remote control.

Equalizer

When the EQUALIZER MODE button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears.

FLAT	No equalization.
	For rock music.
ROCK
	For classical music.
CLASSIC
	For pop music.
POPS
	Vocals are enhanced.
VOCAL
	For jazz.
JAZZ

14