Sharp DK227N operation manual For Use, AC power connection, Outdoor FM antenna, Demonstration mode

XL-DK227NSystem connections (continued)

for Use

AC power connection

After checking all the connections have been made correctly, plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode.

AC outlet

(AC 120 V ~ 60 Hz)

Note:

Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged period of time.

Outdoor FM antenna

Use an outdoor FM antenna if you require better reception. Consult your dealer.

Outdoor

FM antenna

75 ohms coaxial cable

Note:

When an outdoor FM antenna is used, disconnect the supplied FM antenna wire.

Preparation

Demonstration mode

The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand- by mode (demonstration mode), press the X-BASS/DEMO button. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS/DEMO button again.

Note:

When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode.

12