Listening to the radio
Radio
Docking Station
MICRO COMPONENT SYSTEM
Auto power on function:
When you press any of the following buttons, the unit turns on. TUNER (BAND) button (main unit and remote control): The unit turns on and the “TUNER” function is activated.
/ 
button on the main unit: The unit turns on and playback of the last function starts (CD, TUNER, AUDIO IN, iPod).
Tuning
1Press the
2Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM).
3Press the TUNING (
or 
) button on the remote control to tune in to the desired station.
Manual tuning:
Press the TUNING (
or 
) button as many times as required to tune in to the desired station.
Auto tuning:
When the TUNING (
or 
) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
or 
) button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to select stereo mode and “ST” indicator will be displayed.
“
” will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to extinguish the “ST” indicator. The reception changes to monaural, and the sound becomes clearer.
FM stereo mode indicator
FM stereo receiving indicator
26
