Sharp DK227N operation manual Specifications, Amplifier, Speaker

Specifications

XL-DK227N

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

General

Power source	AC 120 V ~ 60 Hz
Power consumption	35 W
Dimensions	Width: 7-1/16" (180 mm)
	Height: 10-2/8" (260 mm)
	Depth: 10-6/8" (273 mm)
Weight	8.8 lbs (4 kg)

CD player

Type	Single disc multi-play compact disc player
Signal readout	Non-contact, 3-beam semiconductor laser
	pickup
D/A converter	Multi bit D/A converter
Frequency response	20 - 20,000 Hz
Dynamic range	90 dB (1 kHz)

Tuner

Frequency range	FM: 87.5 - 108 MHz
	AM: 530 - 1,720 kHz

Amplifier

Output power	RMS : Total 64 W (32 W per channel into 4
	ohms at 1 kHz, 10% Total harmonic
	distortion.)
	FTC : 25 W minimum RMS per channel
	into 4 ohms from 100 Hz to 20 kHz,
	10% Total harmonic distortion.
Output terminals	Speakers: 4 ohms
	Headphones: 16 - 50 ohms
	(recommended: 32 ohms)
	Subwoofer pre-out (audio signal):
	150 mV/10 k ohms at 70 Hz
Input terminals	Audio In (Audio signal):
	250 mV/47 k ohms

Speaker

Type	2-way type speaker system
	2" (5 cm) tweeter
	4" (10 cm) woofer
Maximum input	64 W
power
Rated input power	32 W
Impedance	4 ohms
Dimensions	Width: 5-13/16" (148 mm)
	Height: 10-1/4" (260 mm)
	Depth: 6-15/16" (175.5 mm)
Weight	4.72 lbs (2.14 kg)/each

References

35