Disc, Programmed play | Sharp DK227N specs

Programmed play

You can choose up to 32 selections for playback in the order you like.

1While in the stop mode, press the MEMORY button on the remote control to enter the programming save mode.

2Press the direct search buttons

on the remote control to select the desired track.

Selected track number

You can also select a track by pressing the or button.

3 Press the MEMORY button to save the track number.

4Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programmed.

If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button.

5Press the (CD ) button.

The total number in memory will appear.

XL-DK227N

To clear the programmed selections:
Press the CLEAR/DIMMER button on the
remote control while the “MEMORY” indicator
remote control while the “MEMORY” indicator
is flashing.
is flashing.
Each time the button is pressed, one track will
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
To cancel the programmed play mode:		Playback
While in the stop mode and the “MEMORY” indicator is lit, press the		Playback

CLEAR/DIMMER button on the remote control. The “MEMORY”
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the program:		disc
If a program has been previously stored, the “MEMORY” indicator		disc

will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the previous program.		MP3/WMA
To check which tracks are programmed:		MP3/WMA
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
or	button.
MP3/WMA Folder programmed:
Only tracks in the same folder can be select. Select which folder to
be progammed before entering program mode. (refer page 25 to		or
select folder)		or
Notes:		CD
Notes:
When a disc ejected, the program is automatically canceled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the program operation, random play is not possible.