Sharp DK227N operation manual Listening to a CD or MP3/WMA disc, CD or MP3/WMA disc Playback

Various iPod functions

Function	Main unit Remote control	Operation
Play		Press in the pause
		mode.
Pause		Press in the playback
		mode.
Track up/	____	Press in the playback or
down		pause mode.
		If you press the button in
		the pause mode, press
		the / button to start
		the desired track.
Fast	____	Press and hold down in
forward/		the playback mode.
reverse		Release the button to
		resume playback.
Display	____	iPod back light ON.
		Press for more than 2
		seconds to toggle the
		video out display
		between iPod or TV.
Repeat	____	Press to toggle repeat
		mode.
Shuffle	____	Press and hold down to
		toggle shuffle mode.
iPod	____	Press to view the iPod
Menu		menu during iPod
		function.
iPod	____	Press to confirm the
Enter		selection.
iPod	____	Press to select the iPod
Cursor		menu.
Up/Down

Listening to a CD or MP3/WMA disc

This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording.

MP3:

MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3.

MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality.

This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and VBR files.

During VBR file playback, time counter in the display may differ from its actual playback time.

Bitrate which is supported by MP3 is 32 ~ 320 kbps.

WMA:

WMA files are Advanced System Format files that include audio files which are compressed with Windows Media Audio codec. WMA is developed by Microsoft as an audio format file for Windows Media Player.

“MP3” and “WMA” indicator will light up after the unit reads information on an MP3 or WMA disc.

Bitrate which is supported by WMA is 64 ~ 160 kbps.

Auto power on function:

When you press any of the following buttons, the unit turns on.

CD button (main unit and remote control): The unit turns on and the “CD” function is activated.

CD / button on the remote control: The unit turns on and CD playback starts (regardless of the last function).

/ button on the main unit: The unit turns on and playback of the last function starts (CD, TUNER, AUDIO IN, iPod).

Auto power off function:

In the stop mode of CD, MP3 or WMA operation, the main unit enters the stand-by mode after 15 minutes of inactivity.

XL-DK227N

CD or MP3/WMA disc Playback

19