Philips DVDR985 owner manual Rear Panel

24 Rear Panel

MAINS (AC Power)

Connect the supplied AC power cord here and to a stan- dard AC outlet after completing all other connections.

TV jack
Connect the supplied RF coaxial cable to the Recorder’s TV jack and to	IN RC 6 jack
the RF IN or ANTENNA IN jack (75 ohm) on your television. This lets
you watch channels at the TV normally when the DVD Recorder is off.	Connect a wired
ANTENNA jack	remote control (not
	supplied) to the IN RC
Connect your antenna or Cable TV signal here.	6 jack if you prefer. Ask
Details are on pages 10-14.	your dealer for details
VIDEO IN (CVBS) (EXT2) jack	on compatible remotes.
	The first signals from
Use a video cable to connect this jack to the Video
	the remote control may
Out jack of other equipment. Details are on page 15.
	be lost. The remote
VIDEO OUT (CVBS) (EXT2) jacks
	control supplied with
Connect the supplied yellow-striped video cable to one of	the DVD Recorder will
the VIDEO OUT (CVBS) jacks and to the TV’s Video In	operate all the
jack. Details are on page 12. Use the extra VIDEO OUT	recorder’s features.
(CVBS) jack to connect the Recorder to other equipment.

	EXT 3		EXT 3
	COMPONENT VIDEO	PROG
		SCAN
Y	Y	Y
		L	L
PB	PB	PB	L

PR	PR	PR	R
		R	R

IN

	EXT 2 EXT 1	EXT 1/2			RC 6
S-VIDEO IN (Y-C) (EXT1) jack				DIGITAL AUDIO OUT COAX
Use an S-video cable to connect this				(coaxial) jack
jack to the S-Video Out jack of				Connect a digital audio coaxial cable
optional additional equipment.				here and to the digital audio coaxial In
Details are on page 15.				jack of a Stereo. Details are on page 14.
S-VIDEO OUT (Y-C) (EXT1) jack				DIGITAL AUDIO OUT OPTICAL jack
Connect the supplied S-Video cable
				Connect a digital audio optical cable here and to
here and to a TV’s S-Video In jack.
				the digital audio optical In jack of a Stereo. Details
Details are on page 11.
				are on page 14.
COMPONENT VIDEO IN
			AUDIO OUT/ IN (Left/Right) (EXT1/2 and EXT3) jacks
(Y PB PR) (EXT3) jacks			Use the supplied audio cables (with red and white stripes) to con-
Connect these jacks to the Component Video Out			nect the Recorder’s AUDIO OUT jacks to the Audio In jacks of a
jacks of optional additional video equipment (for			television or Stereo. Details are on pages 10-13.
example, a DVD Player). Details are on page 15.			Use the AUDIO IN jacks when connecting additional equipment
			to the DVD Recorder. Details are on page 15.
COMPONENT VIDEO OUT
							Helpful Hints
(Y PB PR) (EXT3) jacks
					•	Each Audio and Video jack is
Connect the supplied three-strand component
video cable here and to the Component Video						labelled EXT1, EXT2, or EXT3.
In jacks of a TV. Details are on page 10.						Use the same EXT (external)
						number for the audio and video
						connection to the TV. For
						example, if you use S-VIDEO
PROG SCAN OUT (Y PB PR) jacks						OUT, which is EXT1, use the
(Progressive Scan)						EXT1/2 AUDIO OUT jacks.
Connect these jacks to a TV’s Progressive Scan In jacks if					•	Do not touch the inner pins of
the TV has Progressive Scan. Use the supplied three-strand						the jacks on the rear panel.
component video cable. Match the cable stripe colors to						Electrostatic discharge may
the jack colors. If your TV does not have Progressive Scan,						damage the unit permanently.
use the COMPONENT VIDEO OUT jacks instead. Details					•	You only need one audio and
are on page 10. Also see your TV manual for details.						one video connection to a TV.
						You might not use all the jacks.