Philips DVDR985 owner manual Sound, Still Picture/Frame-by-frame Playback

Sound, Still Picture/Frame-by-Frame Playback 31

Sound

Choose a sound setting based on the capabilities of the equipment to which you connected the DVD Recorder. Details are on pages 9-14 and 57.

1 Press SYSTEM MENU.

2 Press : repeatedly to select d.

	Press 89 to select st (stereo), sur (Dolby Surround), or 3d.
	● Select st (stereo) to hear stereo sound. This will work with any
3 type of equipment that has right and left audio jacks (usually red and
	white).
	● Select sur (Dolby Surround) if your audio equipment is compati-
	ble with Dolby Surround. If it is, usually a Dolby Pro Logic logo will
	appear on the equipment.
	● Select 3d if you want to enjoy surround sound but your equip-
	ment is not Dolby Pro Logic compatible.
		d	H E
		s st LK	B
	L	C
	RW	stop
	--:-- --:-- --
		5

4 Press SYSTEM MENU to remove the Menu Bar.

MONITOR		ON/OFF
PREVIOUS	REC/OTR	NEXT

1,4 SLOW FORWARD

PLAY

2,3

CLEAR	SELECT
	TIMER
VOL	CH
	MUTE

DVD+RW DVD+R DVD VIDEO CD

Still Picture/Frame-by-frame Playback

To quickly pause playback, press PAUSE k on the remote control during playback. To advance the still picture one frame at a time, press PAUSE k repeatedly. To resume play, press PLAY :.

Or, to freeze the picture during Disc playback using the Menu Bar, follow the steps below.

1 Press SYSTEM MENU during playback.

2 Press : repeatedly to select .

3 Press 9 to freeze the picture, then press ; : to move the picture backward or forward one frame at a time.

Do not leave a still picture on your TV more than five minutes. This may etch the image onto your screen permanently. Other still visual elements, such as TV station logos or video games, also will damage your TV screen if left too long.

d	H E
st
L B	o
	e
RW pause
0:29:40
0:00:07

4 Press PLAY : to resume regular playback.

5 Press SYSTEM MENU to remove the Menu Bar.

MONITOR		ON/OFF
PREVIOUS	REC/OTR	NEXT

1,5 SLOW FORWARD

PLAY

2,3

4

CLEAR SELECT

Helpful Hint

•The Recorder also refers to Sound settings as Analog output. This means the sound the Recorder sends to your audio equipment (stereo or TV) is ana- log, or two-channel, left and right. You know you are using analog sound because you used the red and white, left and right, Audio jacks in your connections. Details are on page 57. Whether you adjust the sound settings here or as described on page 57, the results will be the same.