If you connected the DVD Recorder’s red and white AUDIO OUT jacks to a Stereo (or Stereo TV) as shown on pages
You do not need to adjust this setting if you used the DIGITAL AUDIO OUT (OPTICAL or COAX) jacks on the DVD Recorder.
Check your Stereo and see if it is compatible with Dolby Surround or TruSurround. Then follow the steps below to choose the Analog Output setting that is most compatible with your audio equipment (or TV).
1 Press SYSTEM MENU. 
may be selected. If it is not, press ; to select it.
2 Press 9 repeatedly to select G, then press :.
3 Press 9 to select Analog output, then press :. Analog output may be selected already. If so, just press : to continue.
4 Press 8 or 9 to select Stereo, Surround, or 3D sound, then press OK.
●Select Stereo to hear stereo sound. This will work with any type of equipment that has right and left audio jacks (usually red and white).
●Select Surround if your audio equipment is compatible with Dolby Surround. If it is, usually a Dolby Pro Logic logo will appear on the equipment.
●Select 3D sound if you want to enjoy surround sound but your equipment is not Dolby Pro Logic compatible.
| W | X | Y | Z | a |
~ | 1 | 2 | 1en | off no | off |
|
|
|
|
| Sound |
G | Digital output |
|
|
| |
Analog output |
| s Stereo | L | ||
|
| ||||
r | Night mode |
| Surround |
| |
|
|
|
|
| |
3D sound
5 Press SYSTEM MENU to remove the menus.
TruSurround and the 
symbol are trademarks of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS Labs, Inc.
Analog Output 57
MONITOR |
| ON/OFF |
PREVIOUS | REC/OTR | NEXT |
|
1,5 SLOW FORWARD
PLAY
4
VOL | CH |
MUTE
T/C | A/CH |
ZOOM ANGLE SUBTITLE AUDIO
DIM | REPEAT | REPEAT | SCAN |
Helpful Hint
•You also can set analog sound in the Menu Bar. Details are on page 31.
