Philips DVDR985 owner manual Installation VCR Plus+ Ch

Installation: VCR Plus+ Ch. 37

If you intend to use the VCR Plus+ programming system, program the DVD Recorder with your local channel information. This will only take a few minutes. Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel numbers differ from area to area, you must set up channels in order for the system to work efficiently.

Before you begin, make sure you have 1) a cable TV channel list, if applica- ble (you can request one from your cable TV company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper.

	Press SYSTEM MENU.	may be selected. If it is not, press ;
1 to select it.
	Press 9 repeatedly to select		, then press : to enter the
2 Installation menu.
3	Press 89 to select VCR Plus+ Ch. (channel), then press :.
	Installation

MONITOR			ON/OFF
PREVIOUS	REC/OTR		NEXT
REVERSE	PAUSE	SLOW	FORWARD	1,6
STOP	FSS		PLAY

2-4

CLEAR	SELECT
	TIMER

Auto Ch. Programming

KAdd/Delete Channels

u B VCR Plus+ Ch.	B
L Time/Date
Cable/Antenna
	To exit press
	SYSTEM MENU

VOL

MUTE

CH5

4

4 Press 89 to select a VCR Plus+ Ch. number, then press the Number buttons or ; : to enter the corresponding Channel number from your TV guide list. If you use the Number buttons, enter the channel number as a three-digit number. For example, for channel 18, press 0,1,8.

Refer to the list from your local newspaper or TV guide for the VCR Plus+ channels and corresponding TV channel numbers for your area. These are the numbers you will enter as the Channel number as you complete the chart on the screen.

Installation
VCR Plus+ Ch.
VCR Plus+ Ch.	Channel
K K...
u 001	s 018	B
L 002	-- -- --
003	-- -- --
004	-- -- --
005	-- -- --
L...	To store
	Press OK

T/C A/CH

ZOOM ANGLE SUBTITLE AUDIO

DIM REPEAT REPEAT SCAN

5 Press OK to store the Channel number. Repeat steps 4-5 as often as necessary to complete the chart.

6 When you are finished, press SYSTEM MENU repeatedly to remove all the menus.