9.1.6 Enable/disable noise reduction (DVT3000 – DVT7000) | 9.1.7 Setting editing mode |
When you record in environments with lots of noise in the background (e.g. while in a crowd or during a train or car journey), you can enable the noise reduction function to reduce the background noise.
1In stop mode
2Press the H / B key to select the record settings menu Ó.
3Press + / – to select the Noise reduction function.
4Press the record key, G, to confirm.
5Press + / – to enable/disable the function.
6Press the record key, G, to confirm.
7Press the J key to exit the menu.
Tip
•Press the J key to cancel the operation without saving and return to the stop mode.
You can edit an existing recording by overwriting a part of it or adding a new one at its end. You can use the Overwrite mode to delete the existing recording from its current position!
1In stop mode
2Press the H / B key to select the record settings menu Ó.
3Press + / – to select the Edit mode function.
4Press the record key, G, to confirm.
5Press + / – to select if you wish to add a new part to an existing recording, whether you want to delete a part of an existing recording and overwrite it, or turn off the function.
XX The selected editing mode icon will be displayed.
Å– add a recording
Æ– overwrite a recording
6Press the record key, G, to confirm.
7Press the J key to exit the menu. 
Tip
•Press the J key to cancel the operation without saving and return to the stop mode.
Table of contents | Settings 43 |
