Philips DVT3500, DVT5000, DVT5500, DVT3100 Enable/disable quiet recording DVT3000 DVT7000

9.1.8 Enable/disable quiet recording (DVT3000 – DVT7000)

Use this function to turn off display indication, LED status, and the signal tones during a recording. This allows you to record while there is no visible indication on the display that a recording is being made.

1In stop mode (start-up screen), press MENU.

2Press the H / B key to select the record settings menu Ó.

3Press + / – to select the Silent recording function.

4Press the record key, G, to confirm.

5Press + / – to enable/disable the function.

6Press the record key, G, to confirm.

7Press the J key to exit the menu.

Tip

•Press the J key to cancel the operation without saving and return to the stop mode.

9.1.9Enable/disable pre-recording function (DVT3000 – DVT7000)

The pre-recording function allows you to record the last five seconds before you press the record key. The device switches into a standby mode and records a five-second loop without saving it. Press the record key to save the five-second loop.

1In stop mode (start-up screen), press MENU.

2Press the H / B key to select the record settings menu Ó.

3Press + / – to select the Pre-recordingfunction.

4Press the record key, G, to confirm.

5Press + / – to enable/disable the function.

6Press the record key, G, to confirm.

7Press the J key to exit the menu.

Tip

•Press the J key to cancel the operation without saving and return to the stop mode.

44 Settings Table of contents