Configuring Backup Interfaces

To configure a new Backup interface, click Wizard. The Backup Interface Wizard opens. For information on the Backup Interface Wizard, refer to “The Backup Interface Wizard” on page 145.

To delete a Backup interface:

1.Select the interface in the table.

2.Click Delete. The interface is marked as deleted in the Backup Interfaces table with the icon in the leftmost column.

3.Click Apply. The backup interface is deleted.

The following table provides a list of fields in the Backup Interfaces table and their descriptions:

Table 53: Backup Interfaces Table Parameters

Field

Description

 

 

Primary Interface

The name of the primary interface being backed up.

 

 

Backup Interface

The name of the Backup interface.

 

 

Failure Delay

The amount of time, in seconds, between the trigger event and the

 

activation of the Backup interface.

 

 

Secondary Disable

The amount of time, in seconds, between the primary interface

Delay

returning to an acceptable operational status and the deactivation of

 

the Backup interface.

 

 

The Backup Interface Wizard

This section provides detailed information on each of the Backup Interface Wizard’s screens. To continue to the next screen, click Next. To return to an earlier screen, click Back. To exit the Backup Interface Wizard without making any changes, click Cancel.

The Backup Interface Wizard consists of the following screens:

Welcome Screen

Primary Interface Screen

Backup Interface Screen

Backup Interface Parameters Screen

Confirmation Screen

The following sections describe each of the Backup Interface Wizard screens.

Issue 5 October 2007 145

Page 145
Image 145
Avaya G250, G450 manual Backup Interface Wizard, Failure Delay, Secondary Disable