| Configuring the Converged Network Analyzer Application |
Table 60: CNA Configuration - Test Plug Parameters (continued) | |
|
|
Field | Description |
|
|
Test Plug 1 | Administrative status of the test plug. Possible values are: |
Administrative State | ● Enable |
| ● Disable |
|
|
Test Plug 1 Status | The status of the Test Plug operation. Possible values include: |
| ● Unregistered - The test plug is attempting to register and is |
| currently unregistered. |
| ● Scheduler List Exhausted - The test plug has exhausted its |
| scheduler list at least once, and is now attempting to register. |
| ● Idle - The test plug is registered, but idle. |
| ● Test - The test plug is running a test. |
| ● Suspend - The test plug is idle because a test was cancelled. |
| ● No IP Address - No IP address is configured for the test plug |
| interface. |
| ● Bad IP Address - The configured test plug IP address is not |
| properly configured for the test plug interface. |
| ● Empty Scheduler List - The scheduler list is empty. No |
| testing events were configured for this device. |
| ● Failed Control Port Bind - The test plug failed to bind the |
| UDP control port. |
| ● Failed FTP Port Bind - The test plug failed to bind to the UDP |
| port for RTP tests. |
| ● Suspend By Rate Limiter - The test plug was suspended by |
| its test rate limiter. |
|
|
| 2 of 2 |
|
|
Issue 5 October 2007 163
