Ethernet WAN Port Configuration
Table 35: Ethernet WAN Port Configuration - General Tab (continued)
Field | Description |
|
|
Encapsulation | The WAN encapsulation method of the selected port. Possible values |
| are: |
| ● ARPA - The port uses the ARPA protocol to establish a |
| connection. |
| ● PPPoE - The port uses PPP over Ethernet to establish a |
| connection. |
| Note: |
| This field is |
|
|
Traffic Shaper Rate | Reserved bandwidth for VoIP traffic. |
(bps) | Possible values are: |
| ● Integer values in the range 64000 - 2048000 |
| ● Disable |
|
|
VoIP Queue | The state of VoIP queuing. VoIP queuing changes the length of the |
| high priority queue providing support for the configuration of a |
| maximum VoIP delay. Possible states include: |
| ● On- Standard VoIP queuing is active. |
| ● Off - VoIP queuing is not active. |
| ● |
| Note: |
| This option is not available when Traffic Shaper Rate |
| is set to Disable. |
|
|
| 3 of 3 |
|
|
Issue 5 October 2007 97
