Viewing Port Configuration
Figure 17: Port Configuration Dialog Box - LLDP Tab
The following table provides a list of the fields in the LLDP tab of the Port Configuration dialog box and their descriptions:
Table 16: Port Configuration Dialog Box - LLDP Tab Parameters
Field | Description |
|
|
LLDP Admin Status | The status of LLDP mode on the device. Possible values are: |
| ● Tx Only - LLDP mode is enabled, and is configured to only |
| accept Tx traffic. |
| ● Rx Only - LLDP mode is enabled, and is configured to only |
| accept Rx traffic. |
| ● Tx and Rx - LLDP mode is enabled and is configured to |
| accept both Tx and Rx traffic. |
| ● Disabled - LLDP mode is disabled. |
|
|
LLDP TLVs Transmission
System Name | The system’s network name. When checked, the system advertises |
| its name to the network. |
|
|
System Description | A brief description of the system (i.e., G250/G350/G450). When |
| checked, this TLV is advertised. |
|
|
System Capabilities | A brief description of the system’s capabilities. When checked, this |
| TLV is advertised. |
|
|
Port Description | A brief description of the device port. When checked, this TLV is |
| advertised. |
|
|
| 1 of 2 |
Issue 5 October 2007 59
