Avaya G250, G450 manual Viewing the Routing Table, Redirects

Viewing the Routing Table

The following parameters are displayed:

Table 72: Dynamic IP Interfaces Table Parameters

Field	Description
IP Interface Name	The name assigned to the selected IP interface.
IP Address	The IP address of this interface. This address is received from a
	remote peer during the PPP-IPCP session, or from a DHCP server
	using a DHCP client.
IP NetMask	The IP network mask of the attached net/subnet.
Layer 2 Interface	The name of the Layer 2 interface with which this subnet is
name	associated.
Type	The type of IP address assignment on the interface. Possible values
	are:
	● DHCP - a dynamic IP interface created by activating the DHCP
	client on the interface and getting an IP address from the DHCP
	server.
	● Negotiated - a dynamic IP interface created by activating
	PPP-IPCP on the interface and getting an IP address.
Oper Status	The operational status of the IP interface.
Redirects	The status of ICMP Redirect service on the interface. Possible values
	are:
	● Enable - Redirect messages are sent if the router is forced to
	resend a packet through the same interface from which it was
	received.
	● Disable - Redirect messages are not sent.

Viewing the Routing Table

To display and update the Routing Table:

Select IP Route > Routing Table. The Routing Table window opens.

Static routes are displayed as read-only in the Routing Table. To configure or create static routes, refer to “Viewing the Static Routing Table” on page 226.

Issue 5 October 2007 223