Avaya G250 IP Simulate Fields, Field Description Use QoS parameters, Checked, Unchecked, Result

	Using the IP Simulate Function
Table 99: IP Simulate Fields (continued)
Field	Description
Use QoS parameters	Enables QoS parameters for forwarding the packet. The possible
	options are:
	● Checked
	● Unchecked
	If the Use QoS Parameters box is checked the IP simulate function
	uses the values in the DSCP and 802.1p fields in determining the
	action to be taken on the simulated packet. The DSCP and 802.1p
	fields must contain valid values.
	If the Use QoS Parameters is unchecked, the IP simulate function
	ignores the DSCP and 802.1p fields.
	Note:
	This field does not appear if the simulation is based on
	an ACL.
DSCP	The value of the DSCP tag on the simulated packet. Valid values are
	0-63. The value of * indicates that this field should be ignored. This
	value affects the forwarding priority of the packet when the operation
	to be taken on the packet is permit.
802.1p Priority	The value of the CoS tag on the simulated packet. The tag value of
	CoS runs from 0-7. The value of * indicates that this field should be
	ignored. This value affects the forwarding priority of the packet when
	the operation to be taken on the packet is permit.
Interface - dir	The interface and direction on an X330WAN expansion module for
	which the rule applies. Select an interface and direction using the
	pull-down list.
Result	The operation that would be carried out on the simulated packet, if the
	selected policy was active.
	2 of 2

Issue 5 October 2007 275