Avaya G250, G450 manual Sub-Interfaces

Viewing Channel Group Information

Table 41: Channel Group Dialog Box - Frame Relay Parameters (continued)

Field	Description
Last Fault Message	The type of error last occurring on the interface. Possible values are:
	● Unknown Error
	● Receive Short
	● Receive Long
	● Illegal Address
	● Unknown Address
	● DLCMI Protocol Error
	● DLCMI Unknown IE
	● DLCMI Sequence Error
	● DLCMI Unknown Rpt
	● No Error Since Reset
Time Since Fault	The amount of time the system was up before the last error
	occurred.
Backup Interface	The interface’s backup status. Possible statuses include:
	● Backup By - Interface x - The selected interface is backed
	up by interface x.
	● Backup Of - Interface x - The selected interface is the
	backup interface for interface x.
	● N/A - The selected interface is not participating in a backup
	scheme.
	2 of 2

Sub-Interfaces

The Sub-Interfaces tab of the Channel Group dialog box provides information about the configuration of Frame Relay sub-interfaces in the Channel Group.

To view the Sub-Interfaces tab of the Channel Group dialog box:

1.Click a Channel Group icon in the Chassis View. A list of Channel Groups on the port appears.

2.Click the Channel Group you want to configure. The Channel Group dialog box opens with the Channel Group tab.

3.Click Sub-Interfaces. The Sub-Interfaces tab of the Channel Group dialog box opens.

Issue 5 October 2007 113