WAN Configuration
The following table provides a list of the fields in the Dynamic CAC dialog box and their descriptions.
Table 54: Dynamic CAC Dialog Box
Field | Description |
|
|
Status | The status of Dynamic CAC on the WAN interface. Possible values |
| are: |
| ● Active - Dynamic CAC is active on the WAN interface. |
| ● Not Configured - Dynamic CAC is not configured (but is |
| supported) for the WAN interface. |
| ● Not Armed - Dynamic CAC is not armed (but is supported |
| and configured) for the WAN interface. |
| ● Armed Not Configured - Dynamic CAC is armed (and |
| supported, but not configured) for the WAN interface. |
| ● Not Supported - Dynamic CAC is not supported for the WAN |
| interface. |
| Note: |
| This field is |
|
|
RBBL (kbps) | Remote Bearer Bandwidth Limit. RBBL is the amount of bandwidth |
| available for CAC on the remote controller. |
| Note: |
| This field is |
|
|
Last Update (sec) | The last time the CAC values were updated (in seconds). |
| Note: |
| This field is |
|
|
Interface | The local WAN interface supporting Dynamic CAC. Possible values |
| are: |
| ● Fast Ethernet |
| ● Serial |
| ● Tunnel |
|
|
CAC BBL (kbps) | The local interface bandwidth threshold after which CAC is |
| activated. |
|
|
CAC Priority | The CAC activation priority. |
|
|
Status | Operational status of Dynamic CAC. Possible values are: |
| ● Not Configured |
| ● Active |
| ● Not Active |
| ● Active ECMP |
| ● Not Supported |
|
|
152 Avaya Integrated Management Release 4.0.1 Software Update Manager