|
| USP Configuration |
Table 49: USP Dialog Box - | ||
|
|
|
| Field | Description |
|
|
|
| Operational Status | The operational status of the |
|
| ● Up - The interface is up and can transmit and receive packets. |
|
| ● Down - The interface is down due to some failure, and cannot |
|
| transmit or receive packets. |
|
| ● Testing - The interface is in testing mode and cannot transmit |
|
| or receive regular data. |
|
| ● Standby - The interface is a backup interface and cannot |
|
| transmit or receive packets unless the primary interface it |
|
| backs up fails. |
|
| ● Disabled - The interface is disabled. It cannot transmit or |
|
| receive packets. |
|
| ● Partially Down - The interface is up. However, some |
|
| interfaces (or PVCs) layered on top of this interface are Down. |
|
| Some packets can be transmitted and received. |
|
|
|
| DLCIs | A list of all DLCIs associated with the |
|
|
|
| Backup Interface | The interface configured to back up this interface. |
|
|
|
|
| 2 of 2 |
|
|
|
DLCIs
The DLCIs tab of the USP dialog box provides information about the DLCIs in the USP. To view the DLCIs tab of the USP dialog box:
1.Click a USP symbol in the Chassis View or Tree View. The USP dialog box opens with the Serial Port tab.
2.Click DLCIs. The DLCIs tab of the USP dialog box opens.
Issue 5 October 2007 139
