WAN Configuration

To delete a Frame Relay sub-interface:

1. Click the Frame Relay sub-interface you want to delete.

Note:

You can only delete Frame Relay sub-interfaces on which no IP interfaces are defined.

2.Click Delete. A confirmation dialog box opens.

3.Click Yes.

4.Click Apply. The Frame Relay sub-interface is deleted.

The following table provides a list of the fields in the Sub-Interfaces tab of the USP dialog box and their descriptions:

Table 49: USP Dialog Box - Sub-Interfaces Parameters

Field

Description

 

 

Name

The name of the Frame Relay sub-interface.

 

 

Description

A user defined description of the Frame Relay sub-interface.

 

 

Type

The provisioning of the Frame Relay sub-interface. Possible values

 

are:

 

Point to point - The Frame Relay sub-interface is configured

 

for connection with a single remote endpoint.

 

Point to multipoint - The Frame Relay sub-interface is

 

configured for connection with multiple remote endpoints.

 

 

Bandwidth (kb/s)

The bandwidth of the Frame Relay sub-interface in bits per second.

 

 

Admin Status

The administrative status of the Frame Relay sub-interface. Possible

 

values are:

 

Enable - The Frame Relay sub-interface is enabled for

 

transmission and receiving of packets.

 

Disable - The Frame Relay sub-interface is disabled for

 

transmission and receiving of packets.

 

 

 

1 of 2

 

 

138 Avaya Integrated Management Release 4.0.1 Software Update Manager

Page 138
Image 138
Avaya G450, G250 manual Type, Admin Status