USP Configuration

Figure 54: USP Dialog Box - Sub-Interfaces Tab

The Sub-Interfaces tab of the USP dialog box provides a list of Frame Relay sub-interfaces in the upper section of the dialog box. To view configuration information for a specific Frame Relay sub-interface, click the sub-interface in the list. Configuration information for the selected Frame Relay sub-interface appears in the bottom of the dialog box.

You can create, modify, and delete Frame Relay sub-interfaces using the Sub-Interfaces tab of the USP dialog box.

To create a new Frame Relay sub-interface:

1.Click Insert. A new row appears in the Sub-Frame-Relay Interfaces list.

2.Enter the parameters for the Frame Relay sub-interface using the fields at the bottom of the dialog box.

3.Click Apply. The Frame Relay sub-interface is created.

To modify the parameters of a Frame Relay sub-interface:

1.Click the Frame Relay sub-interface you want to modify. The configuration parameters of the selected sub-interface appear in the bottom of the dialog box.

2.Modify the parameters you want to change using the fields at the bottom of the dialog box.

3.Click Apply. The Frame Relay sub-interface parameters are modified.

Issue 5 October 2007 137

Page 137
Image 137
Avaya G250, G450 manual USP Dialog Box Sub-Interfaces Tab