Viewing the ARP Table
The following parameters are displayed:
Table 75: ARP Parameters
Field | Description |
|
|
IP Address | The IP address of the station. |
|
|
MAC Address | The MAC address of the station. |
|
|
Layer 2 Interface | The name of the interface. |
name |
|
|
|
Status | The status of the interface. Possible status values are: |
| ● Dynamic - The entry is learned from the ARP protocol. If the |
| station entry is not active for a predetermined time, the entry is |
| deleted from the table. |
| ● Static - The entry has been configured by the network |
| management station and is permanent. |
| ● Invalid - The entry in the table is invalid. |
|
|
You can create or delete ARP table entries. For more information on editing tables, refer to “Editing Tables” on page 210.
You can limit the table entries displayed. To start the display of entries from a specified interface and IP address:
1.Click 
.
Or
Select Action > Start Point. The Start Point dialog box opens.
Figure 102: ARP Table Start Point Dialog Box
2.Enter an IP address in the IP Address field.
3.Select an interface from the If Name listbox.
4.Click OK. The ARP Table displays entries starting with the specified IP address and interface.
Issue 5 October 2007 229
