WAN Configuration
Table 32: Ethernet LAN Port Configuration - General Tab (continued)
Field | Description |
|
|
Auto Negotiation | The configured state of the |
Mode | stations. When enabled, |
| common denominator for communication between endstations, and |
| sets both to the same highest common setting. It also delivers remote |
| link status. |
| For 10BaseT and 100BaseT ports, |
| speed and Duplex Mode of communication between the endstations. |
| For Gigabit ports, |
| setting of the ports. |
| For more information, refer to |
| Guide. |
|
|
Auto Negotiation | The operational state of the |
Status | stations. Possible statuses are: |
| ● Pass - The |
| protocol has been established. |
| ● In Progress - The |
| detecting the communication capabilities of the endstations and |
| setting them to the highest common denominator. |
| ● Fail - The |
| communication capabilities of the end station, or was unable to |
| set them to the highest common denominator. |
| ● Disabled - The |
|
|
Duplex Mode | The state of communication of the selected port. Possible values are: |
| ● Full Duplex- The port can send and receive simultaneously. |
| ● Half Duplex - The port can either receive or send, but cannot |
| do both simultaneously. |
|
|
Speed Mode | The rate of communication of the selected port. Possible values are: |
| ● Ethernet |
| ● Fast Ethernet |
| ● Gigabit Ethernet |
|
|
Flow Control Mode | The state of flow control on the selected port. |
|
|
Operational Status | The warning level of the selected port. Possible values are: |
| ● OK |
| ● Warning |
| ● Fatal |
|
|
Fault Messages | A list of fault messages. |
|
|
| 2 of 2 |
|
|
92 Avaya Integrated Management Release 4.0.1 Software Update Manager