Avaya G450, G250 manual MAC Address, Down

WAN Configuration

Table 35: Ethernet WAN Port Configuration - General Tab (continued)

Field	Description
Administrative	The administrative state of the selected port:
Status	● Enable - The port is enabled and can transmit and receive
	packets.
	● Disable - The port is disabled and cannot transmit or receive
	packets.
MAC Address	The MAC address of the WAN port.
Operational Status	The operational status of the WAN port. Possible values are:
	● OK
	● Down
	● Fatal
Auto Negotiation	The configured state of the Auto-Negotiation protocol between two
Mode	stations. When enabled, Auto-Negotiation detects the highest
	common denominator for communication between endstations, and
	sets both to the same highest common setting. It also delivers remote
	link status.
	For 10BaseT and 100BaseT ports, Auto-Negotiation determines the
	speed and Duplex Mode of communication between the endstations.
	For Gigabit ports, Auto-Negotiation determines the Flow Control
	setting of the ports.
	Possible values are:
	● Enable - Auto-Negotiation is enabled for this interface.
	● Disable - Auto-Negotiation is disabled for this interface.
	For more information, refer to Auto-Negotiationin The Reference
	Guide.
Duplex Mode	The state of communication of the selected port. Possible values are:
	● Full Duplex - The port can send and receive simultaneously.
	● Half Duplex - The port can either receive or send, but cannot
	do both simultaneously.
Speed Mode	The rate of communication of the selected port. Possible values are:
	● Ethernet
	● Fast Ethernet
	● Gigabit Ethernet
	2 of 3

96 Avaya Integrated Management Release 4.0.1 Software Update Manager