Avaya G450, G250 manual Refer to Device Configuration 802.1x Tab on

Device Configuration

The following table provides a list of the fields in the 802.1X table of the Port Configuration dialog box and their descriptions:

Table 15: Port Configuration Dialog Box - 802.1X Tab Parameters

Field	Description
EAP State	Entry Access Protocol authentication status. Possible values are:
	● Initialize
	● Disconnected
	● Connecting
	● Authenticating
	● Authenticated
	● Aborting
	● Held
	● Force Auth
	● Force Unauth
Backend Auth State	The current status of the Backend Authentication state machine.
	Possible values are:
	● Request
	● Response
	● Success
	● Fail
	● Timeout
	● Idle
	● Initialize
Controlled Port	The current value of the Controlled Port status. Possible values are:
Status	● Authorized
	● Unauthorized
Controlled Port	The current status of the Controlled Port control. Possible values
Control	are:
	● Force Authorized
	● Force Unauthorized
IEEE-802.1X Port	The 802.1x mode of operation. Possible values are:
Mode	● Port Based Authentication - used for a single-supplicant case.
	This mode is backwards compatible to the previous 802.1x
	application behavior.
	● MAC Based Authentication - for cases where multiple
	supplicants are connected per port. For more information,
	refer to “Device Configuration - 802.1x Tab” on page 44.
Initialize	Forces initialization of the port. Checking the Initialize checkbox and
	clicking Apply forces the port to be initialized immediately. This
	checkbox is only active when IEEE-802.1x mode is enabled.
	1 of 2

56 Avaya Integrated Management Release 4.0.1 Software Update Manager