Avaya G450, G250 IP Interface Table Parameters Field Description IP NetMask, Layer 2 Interface

IP Route
Table 70: IP Interface Table Parameters			(continued)
	Field	Description
	IP NetMask	The IP network mask of the attached net/subnet.
	Layer 2 Interface	The name of the Layer 2 interface with which this subnet is
	name	associated. Multiple subnets may be associated with a single VLAN,
		so multiple IP interfaces may be associated with the same If Name.
		Note:
		For unnumbered IP interfaces, this field shows only
		point-to-point interfaces such as GRE tunnel, Serial
		Interface, and Dialer.
	Reference Layer 2	An ‘alias’ name for the lower layer interface used to borrow an
	Interface Name	unnumbered IP address. To designate the interface as unnumbered,
		enter a reference interface name. If the IP address is not unnumbered
		this field returns a value of N/A.
		Note:
		An unnumbered IP interface cannot point to another
		unnumbered IP interface.
	Type	The type of IP address assignment on the interface. Possible values
		are:
		● Static - The address is assigned by user configuration.
		● DHCP/IPCP - The address is assigned remotely by a DHCP
		server or IPCP session. The DHCP/IPCP values are read only;
		they can be changed in the Dynamic IP Interfaces table (refer to
		“Viewing the Dynamic IP Interfaces Table” on page 222).
		Unnumbered - The interface is unnumbered and has no IP address.
	Status	The status of the IP interface. If checked, the IP interface is enabled.
	Oper Status	The operational status of the IP interface.
	Directed Broadcast	When enabled, the router forwards directed broadcasts to an attached
		network.
		Note:
		This field is only available when additional parameters
		are selected. To select additional parameters,
		click	on the Routing Manager Application Toolbar.
			2 of 3

220 Avaya Integrated Management Release 4.0.1 Software Update Manager