Avaya G250, G450 Field Description Auto Negotiation, Duplex Mode, Speed Mode, Fast Ethernet

		Viewing Port Configuration
Table 13: Port Configuration Dialog Box - General Tab (continued)
	Field	Description
	Auto Negotiation	The operational state of the Auto-Negotiation protocol between two
	Status	stations. Possible statuses are:
		● Pass - the Auto-Negotiation protocol is enabled and a
		common protocol has been established.
		● In Progress - the Auto-Negotiation protocol is in the process
		of detecting the communication capabilities of the endstations
		and setting them to the highest common denominator.
		● Fail - the Auto-Negotiation protocol was not able to detect the
		communication capabilities of the end station, or was unable
		to set them to the highest common denominator.
		● Disabled - The Auto-Negotiation protocol is disabled.
	Duplex Mode	The state of communication of the selected port. Possible values
		are:
		● Full Duplex - the port can send and receive simultaneously.
		● Half Duplex - the port can either receive or send, but cannot
		do both simultaneously.
	Speed Mode	The rate of communication of the selected port. Possible values are:
		● Ethernet
		● Fast Ethernet
		● Gigabit Ethernet
	Flow Control Mode	The state of flow control on the selected port.
	Operational Status	The warning level of the selected port. Possible values are:
		● OK
		● Warning
		● Fatal
	Fault Messages	A list of fault messages.
		3 of 3

For more information on the user interface, refer to “Using Dialog Boxes and Tables” on page 32.

Issue 5 October 2007 51