Avaya G450, G250 manual Viewing the Dynamic IP Interfaces Table, Layer 2 Interface Name field

IP Route

Note:

The list of VLANs allocated in the system is displayed in the

Layer 2 Interface Name field.

Note:

IP Address for unnumbered interfaces or for interfaces receiving their IP address from a DHCP server or IPCP session cannot be modified.

There are certain constraints when configuring IP static or unnumbered interfaces. After clicking Apply in the IP Interfaces window, the software checks your configuration and displays error messages if applicable. The following table lists the possible errors and their descriptions:

Table 71: Error Messages

Error Text	Description
The Reference Layer 2 interface cannot be	Reference Layer 2 Interface points to an IP
used because it is configured with IP	unnumbered interface.
unnumbered interface
There is already another IP unnumbered	Layer 2 interface is already configured as an IP
interface on the layer 2 interface	unnumbered interface, and you attempt to
	configure Layer 2 interface with a static IP.
There is already another IP static interface	Layer 2 interface is already configured with a static
on the layer 2 interface	IP, and you attempt to configure Layer 2 interface
	as an IP unnumbered interface.
There is already another IP unnumbered	Layer 2 interface is already configured as an IP
interface on the layer 2 interface.	unnumbered interface, and you attempt to add an
	IP unnumbered interface.
The Reference Layer 2 Interface has no	Reference Layer 2 interface is not configured, and
Valid IP address	you attempt to add an IP unnumbered interface.

Viewing the Dynamic IP Interfaces Table

This table allows configuration of ICMP-redirect only. You cannot add/delete rows in the table. To display the dynamic IP interfaces:

Select IP Route > Dynamic IP Interfaces. The Dynamic IP Interfaces Table window opens.

Figure 97: Dynamic IP Interfaces Table

222 Avaya Integrated Management Release 4.0.1 Software Update Manager