Avaya G450, G250 manual Esp, Gre, Icmp, Igmp, Ospf, Pim, Tcp, Udp, Vrrp

Policy Based Routing

Table 94: Policy Based Routing Rules List Fields (continued)

Field	Description
Dst Wildcard	Destination Address Wildcard. A wildcard that can modify the definition of
	the destination addresses to which this rule applies.
	You can change the Destination Address Wildcard using the pull-down
	list or enter a user defined wildcard. Possible DestAddrWild values
	include:
	●	Host
	●	Any
	●	User Defined
	For more information about using wildcards, refer to “Using Address
	Wildcards” on page 272.
Fragment	When enabled, the IP rule applies only to packets that are non-initial
	fragments, and does not apply to initial fragments or non-fragments.
	When enabled, the Src Application and Dst Application fields return a
	value of N/A.
Not	Logical not. This enables all protocols except for the protocol listed in the
	following Protocol field.
Protocol	Protocol. The protocol of the packets to which this rule applies. Possible
	values include:
	●	AH
	●	ESP
	●	GRE
	●	ICMP
	●	IGMP
	●	IPComp
	● IP-in-IP
	●	OSPF
	●	PIM
	●	RSVP
	●	SpectraLink
	●	TCP
	●	UDP
	●	VRRP
	●	IP
Not	Logical not. This enables all traffic except for the traffic affected by the
	following DSCP filter to flow normally.
DSCP Filter	DSCP Filter. The DSCP filter applied to the traffic to which this rule
	applies.
Not	Logical not. This enables all applications except for the application listed
	in the following Src Application field.
		2 of 3

262 Avaya Integrated Management Release 4.0.1 Software Update Manager