Step 1: Check the country setting
1.Switch on the first TV (with the channels that you want to copy to the second TV).
2.Press 
.
3.Select [Setup] > [Search for channels] > [Reinstall channels], then press OK.
The country menu is displayed.
4.Make a note of the current setting.
5.Press 
.
6.Press [Cancel] to exit.
Step 2: Copy channel list to USB
1.Connect a USB storage device to the first TV (with the channels installed on it).
2.Press 
.
3.Select [Setup] > [Channel settings] or [Satellite settings].
4.Select [Channel installation] > [Copy channel list] > [Copy to USB], then press OK.
The channel list is copied to the USB storage device.
5.Disconnect the USB storage device.
Step 3: Copy channels to a TV with no channels installed
1.Switch on the second TV, on which you want to copy the channel list.
Initial installation starts.
2.Follow the onscreen instructions and select the same country as the TV whose channel list you want to copy.
3.Skip the search for channels.
4.Connect the USB storage device.
5.Press 
.
6.Select [Setup] > [Channel settings] or [Satellite settings].
7.Select [Channel installation] > [Copy channel list] > [Copy to TV], then press OK.
The channel list is copied to the TV storage device.
8.Disconnect the USB storage device.
Step 3: Copy channels to a TV with pre- installed channels
1.Switch on the second TV, on which you want to copy the channel list.
2.Press 
.
3.Select [Setup] > [Search for channels] > [Reinstall channels], then press OK.
The country menu is displayed.
4. | Make sure that the country setting is the |
| |
same as for the first TV. | English | ||
5. | Press . | ||
| |||
6. | Press [Cancel] to exit. |
| |
7. | If the country setting is different, reinstall |
| |
the second TV to match the country setting |
| ||
| |||
of the first TV. See Change your TV settings |
| ||
> Reset all (Page 44). |
| ||
8. | Connect the USB storage device to the |
| |
second TV. |
| ||
9. | Press . |
| |
10. Select [Setup] > [Channel settings] or |
| ||
[Satellite settings].
11. Select [Channel installation] > [Copy channel list] > [Copy to TV], then press OK.
The channel list is copied to the second TV. 12. Disconnect the USB storage device.
Satellite settings
What you can do
This TV can receive signals from 4 different low noise
Note:
∙Satellite reception is available for certain models only. [Search for satellite] is only available if the TV supports
∙To receive satellite channels, connect a satellite receiver to the SAT connector on your TV.
Install satellite channels
Reinstall satellites
1. While you watch TV, press 
.
2.Select [Setup] > [Search for satellite] > [Reinstall satellites].
3.Follow the onscreen instructions to complete the installation.
4.Once complete, select [Finish], then press OK.
EN 39
