Philips PFL50X8K/12 user manual Watch TV, Switch TV on or off, Adjust TV volume, Switch the TV on

Watch TV

Switch TV on or off

Switch the TV on

∙Connect the TV to the mains outlet and switch on the main power.

∙If the TV is not switched on, the standby LED remains off. Press on the TV.

∙If the standby LED is lit, press on the remote control.

Note: There is a short delay before the TV

responds.

Tip: If you cannot find your remote control and want to switch on the TV from standby, press any key on the TV.

Switch TV to standby

Press on the remote control.

The standby LED on the TV switches to red.

Switch off the TV

Press on the TV.

The standby LED switches to off.

Note: Though your TV consumes very little energy when it is in standby or switched off, it does use some energy. If you are not going to use the TV for an extended period of time, disconnect the TV from the mains plug.

EN 12

Automatic switch off

You can save energy with this TV's energy efficiency settings, which are enabled by default. If there is no user interaction (such as pressing a remote control button or a control on the TV) for four hours, the TV will automatically switch to standby.

To disable automatic switch off

1.While you watch TV, press the Green button on the remote control.

2.Select [Auto switch off], then press OK.

3.Use the Navigation buttons to make a selection, then press OK.

Adjust TV volume

Increase or decrease the TV volume

∙Press +/- on the remote control.

∙Press +/- on the TV.

Mute or restore the TV volume

∙Press on the remote control to mute the volume.

∙Press again to restore the volume. Adjust headphone volume

1.Press .

2.Select [Setup] > [TV settings] > [Sound]

>[Headphone volume], then press OK.

3. Select a level.