Philips PFL50X8K/12, PFL50X8T/12, PFL50X8T/60, PFL50X8H/12 Control devices, Select speaker output

Switch on EasyLink

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink].

3. Select [EasyLink] > [On], then press OK.

Control devices

If you connect multiple HDMI-CEC devices that support this setting, you can control all such devices through the TV remote control.

Note: This is an advanced setting. Devices that do not support this setting cannot respond to the TV remote control.

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink] > [EasyLink remote control].

3.Select [On] or [Off], then press OK. Tips:

∙To switch back to TV control, press , then select [Watch TV].

∙To control another device, press , then select the device from the Home menu.

EasyLink buttons

You can control HDMI-CEC compliant devices with the following buttons on the TV remote control:

∙: Switch the TV and the connected device on or to standby.

∙Play buttons: Control video or music play.

∙Numeric buttons: Select a title, chapter or track.

∙OK: Start, pause or resume play on the connected device, activate a selection, or access the device menu.

∙: Display the TV Home menu.

Switch off connecting devices

You can also set the TV to switch off the connecting HDMI-CEC compliant devices if they are not the active source. The TV switches the connecting device to standby after 10 minutes of inactivity.

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink].	English
3. Select [Auto switch off devices] > [On],
then press OK.

Select speaker output

If a connected device is HDMI Audio Return Channel (HDMI ARC) compliant, you can output TV audio through an HDMI cable. Additional audio cables are not required. Make sure you connect the device to the

HDMI ARC connector on the TV. See Connect your TV > About cables > HDMI

(Page 45).

Switch on HDMI ARC

1.Press .

2.Select [Setup] > [TV settings] > [Sound]

>[Advanced] > [HDMI 1 - ARC].

3.Select one of the following, then press OK.

∙ [On]: Hear the TV audio through the connected HDMI-ARC compliant

device.

∙ [Off]: Hear the TV audio through the TV speakers, or through a device connected through the digital audio out connector.

Note: Make sure that all HDMI-CEC settings are properly set up on the connected device. Set up TV speakers

1.Press .

2.Select [Setup] > [TV settings] > [Sound]

>[Advanced] > [TV speakers].

3.Select an option, then press OK: ∙ [Off]: Switch off TV speakers. ∙ [On]: Switch on TV speakers.

∙ [EasyLink]: Switch off TV speakers and stream TV audio to a connected HDMI-CEC audio device.

∙ [EasyLink autostart]: When a HDMI- CEC audio device is connected, automatically switch off TV speakers and stream TV audio to the device.

Change TV audio streaming

You can switch audio between TV speakers and a connected amplifier at any time.

EN 57