Update with USB
What you need
∙A USB storage device that has at least 256 megabytes of storage space, is FAT or DOS formatted and has its write protection disabled.
∙Access to a computer with a USB connector and Internet access.
∙A file archiver program that supports the ZIP file format: for example, WinZip® for Microsoft® Windows® or StuffIt® for Macintosh®.
Note: Do not use a USB hard drive.
Download the latest software
1.Connect the USB flash drive to your computer.
2.On your computer, launch a browser such
as Internet Explorer® or Safari®, and see www.philips.com/support.
3.Find your TV and locate the software and drivers available for your TV set. The software upgrade is available as a compressed file (*.zip).
4.If the software version is higher than the version on your TV, click the software upgrade link.
5.Accept the licence agreement and download the ZIP file to the USB flash drive. Note: Some Internet browsers, such as Mozilla® Firefox® or Google® Chrome®, may download the ZIP file directly to your computer. If this happens, copy the file to your USB flash drive.
6.For Internet Explorer: Using a file archiver, extract autorun.upg from the downloaded ZIP file. Do not copy or place the extracted file into a folder.
6.For Safari: When the download is complete, autorun.upg is automatically extracted from the ZIP file to your computer. Copy the file to the USB flash drive. Do not copy or place the file into a folder.
7.Eject and disconnect the USB flash drive from the computer.
Upgrade the TV software
Caution:
∙ Do not switch off the TV or remove |
|
the USB flash drive during the software | English |
∙ If a power failure occurs during the | |
upgrade. |
|
upgrade, do not remove the USB flash |
|
drive from the TV. The TV continues |
|
the upgrade as soon as power is |
|
restored. |
|
∙ If an error occurs during the upgrade, |
|
retry the upgrade from the beginning. If |
|
the error reoccurs, contact Philips |
|
Consumer Care. |
|
1.Remove all USB devices such as a
adapter from the TV, then switch on the TV.
2.Connect the USB flash drive to the TV. The software upgrade starts automatically. The upgrade is complete when a notification message appears on screen.
3.Before you restart the TV, disconnect the USB flash drive from the TV.
4. Press 
on the remote control – do not press 
more than once.
The TV switches off, then back on again. The upgrade is complete.
5.To prevent accidental updates to the TV software, reconnect the USB flash drive to your computer and delete autorun.upg.
Update from digital broadcast
When available, the TV can receive software updates through digital broadcasts. When a software update is received, you are prompted to update the software. We strongly recommend that you update the software when prompted.
Follow the onscreen instructions.
If you do not update the TV software when the update is received, you are prompted to save the update file. To update the software later:
1.Press 
.
2.Select [Setup] > [Software settings] >
[Local updates].
3.Select the file that you downloaded and follow the onscreen instructions to complete the update.
EN 43
