Before You Start, Installing the Battery Pack | Philips TSU 7500

Before You Start

When you use ProntoPro NG for the first time, you will have to:

■install the battery pack;

■place ProntoPro NG in the docking station and charge it.

Attention Use the docking station only with the Philips NiMH rechargeable battery pack. Never plug other appliances (like mobile phones, PDA’s, …) into the docking station. This causes damage to the connector and the appliance.

Installing the Battery Pack

1Press the latch on the battery cover with your thumb and then slide the cover forward firmly.

2Lift up the battery cover.

3Place the battery pack in the battery compartment.

User Guide

10

Image 10

Philips TSU 7500 manual Before You Start, Installing the Battery Pack

Contents

ProntoPro Next Generation ProntoPro Next Generation User Guide Table of Contents Table of Contents Taking a First Look ProntoPro NG Home Theater Control Panel Taking a First Look Device USB port Touch Screen Docking Station What’s New for ProntoPro Next Generation? ProntoPro NG has a USB port to make downloading much easier Installing the Battery Pack Before You Start Charging the ProntoPro NG Cool down the battery pack Getting Started Tilt ProntoPro NG more than 50 degrees default settingTurning on ProntoPro NG Changing the Time Format Setting Time and DateChanging the Time To change the month Changing the DateTo change the day Tools Menu To change the year Setting the LanguageYou can change the language used on your ProntoPro NG Operating ProntoPro NG Device Overview Overview Using the Tools Defining the Brand for a Device Customizing ProntoPro NGSelecting the Brand and Code Set for your Device Selecting the code set Installing the brandSelecting the brand Tap ‘Code sets’ screen appears Searching the Brand and Code Set for your device Searching the code setTap and point ProntoPro NG at the device Learning Commands Searching the brand Learning a Device Action Learning a ButtonTap the button you want to learn Labeling Elements Tap the Device for which you want to learn a Device Action Labeling a Button You can choose from four different character sets Tap in the ‘Label Tool’ screen. The Page Overview appears Labeling a DeviceLabeling a Follow the instructions 6 to 8 of ‘Labeling a Button’ on Adding Devices Adding a New Device Copying an Existing Device Deleting a Device Deleting ElementsDeleting a Button Delete Tool allows you to delete a button or a device Moving Devices Adjusting the Settings Setting the Timeout of the LCD Screen Setting the Brightness of the BacklightSelect First Settings Page appears Setting the Volume Level of the Hard Buttons Setting the Volume LevelSetting the Navigation for ProntoPro NG Setting the Volume Level of the Touch Screen Setting the Animation Mode Calibrating the Touch Screen Adjusting the Screen Activation Settings Adjusting the Firm Keys Settings Adjusting the Cursor Keys Settings Adjusting the Pickup Sensor Settings Creating and Editing Macros Using the Power FeaturesCreating a Macro To add a beep to the action list To add a delay to the action listTo add an action to the action list To test the macro Moving an action in the action list Editing a MacroTo finish the macro Deleting an action from the action list Creating and Editing Timers Activating Timers Adding a Timer Creating and Editing TimersDeleting a Timer Labeling a Timer Editing a Timer Setting the Start Date Setting the Start Time or Stop Time Defining the Repeat Settings Defining the Start Action or Stop Action Repeat toggle Is provided below the button Operating ProntoPro NG with the CursorNG’s touch screen To set the cursor navigation Operating ProntoPro NG with RF An RF Extender not included is therefore required Selecting RF to Operate your Devices Selecting IR to Operate your Devices With ProntoProEdit NG you can Plug one end of the cable in the USB port on your computer ProntoProEdit NG How do I reset ProntoPro NG? Why don’t my buttons work properly?How do I calibrate the touch screen? Reset button Devices do not respond to commands from ProntoPro NG TroubleshootingGeneral Problems ProntoPro NG shuts off automatically ProntoPro NG will not learn commands Customizing ProblemsButtons are not sending the correct commands Configuration file is corrupted Timers do not work Memory Storage ProblemsProntoPro NG error messages Connection to the PC Important Notices Cleaning ProntoPro NGMaintaining ProntoPro NG Upgrading ProntoPro NG List of Symbols List of Symbols List of Symbols Specifications Included Glossary Action LCD USB Index LCD screen timeout, 33 Learn Tool, 23 learning Volume mute, 5 volume down, 5 volume level, 34 volume up