Labeling Elements | Philips TSU 7500 manual

Customizing ProntoPro NG

4Position ProntoPro NG and the remote control as illustrated above.

Note Make sure that you aim ProntoPro NG’s learning eye at the remote control’s IR window.

The distance between ProntoPro NG and the remote control should be between 2 and 8 inches (5 and 20 cm).

5Tap the Device for which you want to learn a Device Action.

A Learning indication appears in the upper right corner of the touch screen.

6Press and hold the key on the other remote control for 1 second. Make sure you press the key within 5 seconds.

If learning succeeded, you will get an OK message. If learning failed, you will get a Failure message.

See ‘ProntoPro NG will not learn commands’ on page 58 for more information.

7When you want ProntoPro NG to learn other device actions, repeat steps 5 and 6.

8Press the left firm key labeled below the touch screen to stop learning.

Labeling Elements

The Label Tool allows you to label a button, a device or a page. In the Label Tool you can find a virtual keyboard. This keyboard zooms in when you tap a character.

The keyboard contains five different character sets, including a series of symbols you can use for labeling. You use the Shift button to switch between the five character sets on the keyboard.

For a complete list of the symbols, see ‘List of Symbols’ on page 61.

User Guide

25

EN

Image 25

Philips TSU 7500 manual Labeling Elements, Tap the Device for which you want to learn a Device Action

Contents

ProntoPro Next Generation User Guide ProntoPro Next Generation Table of Contents Table of Contents ProntoPro NG Home Theater Control Panel Taking a First Look Device Taking a First Look USB port Touch Screen Docking Station ProntoPro NG has a USB port to make downloading much easier What’s New for ProntoPro Next Generation? Before You Start Installing the Battery Pack Charging the ProntoPro NG Cool down the battery pack Getting Started Tilt ProntoPro NG more than 50 degrees default settingTurning on ProntoPro NG Changing the Time Format Setting Time and DateChanging the Time To change the day Changing the DateTo change the month Tools Menu To change the year Setting the LanguageYou can change the language used on your ProntoPro NG Device Overview Operating ProntoPro NG Overview Using the Tools Defining the Brand for a Device Customizing ProntoPro NGSelecting the Brand and Code Set for your Device Selecting the brand Installing the brandSelecting the code set Tap ‘Code sets’ screen appears Searching the Brand and Code Set for your device Searching the code setTap and point ProntoPro NG at the device Searching the brand Learning Commands Learning a Device Action Learning a ButtonTap the button you want to learn Tap the Device for which you want to learn a Device Action Labeling Elements You can choose from four different character sets Labeling a Button Labeling a Labeling a DeviceTap in the ‘Label Tool’ screen. The Page Overview appears Follow the instructions 6 to 8 of ‘Labeling a Button’ on Adding a New Device Adding Devices Copying an Existing Device Deleting a Button Deleting ElementsDeleting a Device Delete Tool allows you to delete a button or a device Moving Devices Adjusting the Settings Setting the Timeout of the LCD Screen Setting the Brightness of the BacklightSelect First Settings Page appears Setting the Navigation for ProntoPro NG Setting the Volume LevelSetting the Volume Level of the Hard Buttons Setting the Volume Level of the Touch Screen Calibrating the Touch Screen Setting the Animation Mode Adjusting the Firm Keys Settings Adjusting the Screen Activation Settings Adjusting the Pickup Sensor Settings Adjusting the Cursor Keys Settings Creating and Editing Macros Using the Power FeaturesCreating a Macro To add an action to the action list To add a delay to the action listTo add a beep to the action list To test the macro To finish the macro Editing a MacroMoving an action in the action list Deleting an action from the action list Activating Timers Creating and Editing Timers Adding a Timer Creating and Editing TimersDeleting a Timer Labeling a Timer Editing a Timer Setting the Start Time or Stop Time Setting the Start Date Defining the Start Action or Stop Action Defining the Repeat Settings Repeat toggle Is provided below the button Operating ProntoPro NG with the CursorNG’s touch screen To set the cursor navigation An RF Extender not included is therefore required Operating ProntoPro NG with RF Selecting RF to Operate your Devices Selecting IR to Operate your Devices Plug one end of the cable in the USB port on your computer With ProntoProEdit NG you can ProntoProEdit NG How do I reset ProntoPro NG? Why don’t my buttons work properly?How do I calibrate the touch screen? Reset button General Problems TroubleshootingDevices do not respond to commands from ProntoPro NG ProntoPro NG shuts off automatically Buttons are not sending the correct commands Customizing ProblemsProntoPro NG will not learn commands Configuration file is corrupted ProntoPro NG error messages Memory Storage ProblemsTimers do not work Connection to the PC Maintaining ProntoPro NG Cleaning ProntoPro NGImportant Notices Upgrading ProntoPro NG List of Symbols List of Symbols List of Symbols Included Specifications Action Glossary LCD USB Index LCD screen timeout, 33 Learn Tool, 23 learning Volume mute, 5 volume down, 5 volume level, 34 volume up