User Guide
22
Customizing ProntoPro NG
Selecting the Brand and searching the Code Set for your device
Note Make sure the device for which you are searching the brand is turned on.
1Tap and hold the ProntoPro NGicon in the upper left corner of the
touch screen for 3 seconds. The Tools Menu appears.
2Tap in the Tools Menu.
The ‘Brand Tool’ screen appears.
3Tap in the ‘Brand Tool’ screen.
The Device Overview appears.
4In the Device Overview, tap the Device for which you want to define
the brand.
A message screen appears.
5Tap .
The ‘Brands’ screen appears.
6Select the brand of your device as described in ‘Selecting the brand’
on page 21.
Searching the code set
1Tap in the ‘Code Sets’ screen.
The ‘Searching the Code Set’ screen appears.
2Tap and point ProntoPro NG at the device.
The ‘Searching’ screen appears. ProntoPro NG searches through the list of
code sets for the selected brand, by sending out an IR code for each code set.
3When the device for which you are defining the brand, turns off,
tap in the ‘Searching’ screen.
The ‘Installing the Brand’ screen appears.
4To install the brand and code set, follow the instructions described in
‘Installing the brand’ on page 21.
Searching the Brand and Code Set for your device
1Tap and hold the ProntoPro NGicon in the upper left corner of the
touch screen for 3 seconds. The Tools Menu appears.
2Tap in the Tools Menu.
The ‘Brand Tool’ screen appears.
3Tap in the ‘Brand Tool’ screen.
The Device Overview appears.
ProntoProNG_0505_ML_1EN.qxd 14-06-2005 09:54 Pagina 22