D6 egdVgObbTS gTRdgSXcV 0iXbTg1
Use programmed recording to automatically start and stop a recording at a later date.
To make a programmed recording, your video recorder needs to know:
*the date you want to make the recording;
*the programme number for the TV channel you want to record;
*the start and stop time of the recording;
*VPS or PDC on or off
The video recorder stores all the information in a TIMER block. You can programme up to 6 TIMER blocks a month in advance.
/keh/ 0k˚yz e h v
/eSR/ 0e Szˇ˚ R
With ’VPS and PDC’, the TV station controls the start time and the length of the recording. This means that the video recorder
switches itself on and off at theeven if a TV programme you want to record begins earlier or finishes later
than expected. |
|
Usually the start time is the | as the VPS or PDC time. But |
if your TV guide gives a VPS or PDC time which is different to the programme’s start time (for example, 20.15 and VPS 20.14), you must enter ’20.14’ as the start time.
If you want to programme a time that is different from the VPS or PDC time, you must switch off VPS or PDC.
ev
0 /h¨
All the important information needed for a programming is contained in the
aSwitch on the TV set and select the programme number for the video recorder.
b Press TIMER on the remote control.
cEnter the entire
Enter 53124 for the
If you make a mistake, you can clear your instructions with CLEAR (CL) .
SHOWVIEW |
|
SHOWVIEW NUMBER | REP. |
ONCE |
________________________________
REP.pSELECT STOREpOK TIMER LISTpTIMER
dUse SELECT to select daily or weekly programming. /ONCE/: Recording once
/WEEK./: Recordings every week on the same day of the week.
e Confirm with OK . Your programming details will then
appear on the TV screen.
TIMER
VPS
DATE REP. PROG. START PDC END 21
________________________________
STOREpOK
If SHOWVIEW does not recognise the TV channel, ’SELECT PROG. NR.’ will appear on the TV
screen. Select the desired programme number (or channel name) with the number buttons
If ’SHOWVIEW NUMBER NOT VALID’ appears on the TV screen, this means you entered an incorrect ShowView number or the incorrect date for the recording. The start of the programmed recording must be within the next 7 days. Correct your instructions or end with TIMER .
If
have programmed a the wrong day for the daily recording. Daily programming can only be used for recordings to be made from Monday to Friday.
Under ’START’, use SELECT to switch ’VPS/PDC’ on or off. If ’]’ appears on the screen, the function has been switched on.
f Confirm with OK when the information is correct.
20
