gConfirmwith OK .
hToend, press MENU .
Yourdecoder has now been allocated to this TV channel.
DWhenthe function is switched on, ’DEC’will appear
inthe video recorder display for the TV channel you
haveselected.
BBC1
Manual TV channel search
Incertain cases the ’Automatic TV channel search’ may not be
ableto find all of the TV channels (e.g. coded TV channels). In
thatcase, use this manual method to set the channels.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPress MENU onthe remote control. The main menu will
appear.
cSelectthe line ’MANUAL SEARCH’ with rP=or
;Pqandconfirm with OK .
MANUAL SEARCH
PROGRAMME NUMBER è P01 p
S-CHANNEL NO
CHANNEL NUMBER 21
DECODER OFF
TV SYSTEM AUTO
NICAM ON
________________________________
EXITpMENU STOREpOK
dSelectthe line ’PROGRAMME NUMBER’ with rP=or
;Pq.
eSelectthe desired programme number (e.g.: ’P01’) with
Qor P.
fInthe line ’S-CHANNEL’, use Ptoselect:
’NO’:To enter the channel
’YES’:To enter a special channel
gEnterthe channel of the desired TV channel in line
’CHANNEL NUMBER’with the number buttons 0-9 .
DIfyou don’t know the channel number of the desired
TVchannel, hold Pinline ’CHANNEL NUMBER’
tostart the automatic search.
Repeatautomatic search you until have found the
desiredTV channel. A changing channel number
willappear on the TV screen.
hIfyou want to allocate a decoder, in line ’DECODER’
select’ON’ with P.
iThisvideo recorder can receive Hi-Fi sound
transmissionsin ’NICAM’. However, if sound distortion
occurswith poor reception, you can switch’NICAM’ off.
Todo this, select ’OFF’ in line ’NICAM’ with Por
Q.
jTochange the TV system, in line ’TV SYSTEM’, select
theTV system with Qor P.
kPress OK tostore the TV channel. ’STORED’ will briefly
appearon the TV screen.
DIfyou want to search for further TV channels, start
againat step c.
lToend, press MENU .
Satellite receiver
Youcan receive channels from the satellite receiver via the
scartsocket AV2EXT2 .
Todo this, select programme number ’E1’ with 0onthe
remotecontrol and then select programme number ’E2’ with
rP=.You should select the satellite channels on the
satellitereceiver itself.
Special installation functions
Youcan select one of the following installation functions in
orderto adapt the video recorder to your own specific
requirements.
7